A printed circuit board (PCB) mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate.
Share:
ABOUT US
Hot Tub Circuit Boards
A printed circuit board (PCB) mechanically supports and electrically connects electronic components or electrical components using conductive tracks, pads and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Components are generally soldered onto the PCB to both electrically connect and mechanically fasten them to it.
Printed circuit boards are used in all but the simplest electronic products. They are also used in some electrical products, such as passive switch boxes.
Hot Tub Circuit Boards control the function and programming for spa or hot tub pumps, ozone, lights, blower and heater.
PCBA PRODUCTS SHOW
PRODUCTION LINE
Testing Spa Transformers
● Shut off all power to the spa at the breaker and spa pack.
● Set your Ohm meter to the lowest setting.
● Locate the resistance values printed on the transformer.
● Place your meter leads onto a Primary wire and a Secondary wire.
● Compare the reading to the transformer specs specified.
